MNS DIGITAL GATEWAY LED INDICATION TROUBLESHOOTING AND MAINTENANCE
62 1TGC908004M0201
LED indication
Description Additional Information / Actions
General DCS fault
(only available if con-
figured)
Please check if MNS Digital Gateway
hardware (the identity number) matches
to the project specification (e.g. Profibus
MNS Digital Gateway <-> Profibus project).
Furthermore the Data Mapping should be
checked
Please use MNavigate to download the
MNS Digital Gateway configuration or
download Mapping file again (ref. to
MNavigate Help or MNavigate Manual)
General DCS fault
(only available if con-
figured)
See above
LED 8
MNS Digital Gateway is Primary
in Dual Redundant
configuration.
fault (only available if
configured)
Please use MNavigate to check the
redundancy status (Redundancy Report) .
If a mismatch was found please download
the regarding file.
For details please refer to MNavigate
Help or MNavigate Manual.
General redundancy
fault (only available if
configured)
See above
LED 6
DCS communication active
Table 35 MNS Digital Gateway LED indication
To Next Page
Loading...
