ABB REC650 - Settable Timer Function Block TIMERSETQT

11.3.2.6 Settable timer function block TIMERSETQT
Identification
Function description
IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Settable timer function block TIMERSETQT - -
Functionality
The Settable timer function block (TIMERSETQT) has pick-up and drop-out delayed
outputs related to the input signal. The timer has a settable time delay (t).
When the output changes value the timestamp of the output signal is updated. The
supported “quality” state bits are propagated from the input each execution to the
output. A change of these bits will not lead to an updated timestamp on the output.
On
Off
t
tdelay
tdelay
en08000289-2-en.vsd
Input
IEC08000289 V1 EN
Figure 182: TIMERSETQT function
Function block
TIMERSETQT
INPUT ON
OFF
IEC09000303-1-en.vsd
IEC09000303 V1 EN
Figure 183: TIMERSETQT function block
Signals
Table 300: TIMERSETQT Input signals
Name
Type Default Description
INPUT BOOLEAN 0 Input signal
Section 11 1MRK 511 287-UEN A
Logic
364
Technical manual