ABB REF615 F - AND Function Block

Table 89: OR Output signal
Name Type Description
O BOOLEAN Output signal
Table 90: OR6 Output signal
Name Type Description
O BOOLEAN Output signal
Settings
The function does not have any parameters available in LHMI or Protection and
Control IED Manager (PCM600).
3.14.1.2 AND function block
Function block
GUID-7592F296-60B5-4414-8E17-2F641316CA43 V1 EN
Figure 43: Function blocks
Functionality
AND and AND6 are used to form general combinatory expressions with Boolean
variables.
The default value in all inputs is logical true, which makes it possible to use only
the required number of inputs and leave the rest disconnected.
AND has two inputs and AND6 has six inputs.
Signals
Table 91: AND Input signals
Name
Type Default Description
B1 BOOLEAN 1 Input signal 1
B2 BOOLEAN 1 Input signal 2
1YHT530004D05 D Section 3
Basic functions
615 series 109
Technical Manual