3.14.7.3 Signals
Table 141: MVGAPC Output signals
Name Type Description
Q1 BOOLEAN Q1 status
Q2 BOOLEAN Q2 status
Q3 BOOLEAN Q3 status
Q4 BOOLEAN Q4 status
Q5 BOOLEAN Q5 status
Q6 BOOLEAN Q6 status
Q7 BOOLEAN Q7 status
Q8 BOOLEAN Q8 status
3.14.8 Local/remote control function block CONTROL
3.14.8.1 Function block
GUID-FA386432-3AEF-468D-B25E-D1C5BDA838E3 V2 EN
Figure 67: Function block
3.14.8.2 Functionality
Local/Remote control is by default realized through the R/L button on the front
panel. The control via binary input can be enabled by setting the value of the LR
control setting to "Binary input".
The actual Local/Remote control state is evaluated by the priority scheme on the
function block inputs. If more than one input is active, the input with the highest
priority is selected.
The actual state is reflected on the CONTROL function outputs. Only one output is
active at a time.
Section 3 1YHT530004D05 D
Basic functions
130 615 series
Technical Manual
To Next Page
Loading...
