ABB RET670 - LogOn or logOff

23. Ordering for pre-configured IED
Guidelines
Carefully read and follow the set of rules to ensure problem-free order management.
Please refer to the available functions table for included application functions.
PCM600 can be used to make changes and/or additions to the delivered factory configuration of the pre-configured.
To obtain the complete ordering code, please combine code from the tables, as given in the example below.
Example code: RET670 *2.0-A30X00- A02H02-B1A3-AC-KB-B-A3X0-DAB1RGN1N1XXXXXXX-AXFXXX-AX. Using the code of each position #1-12 specified as
RET670*1-2 2-3 3 3 3 3 3 3 3 3 3 3 3 3-4 4-5-6-7 7-8-9 9 9 9-10 10 10 10 10 10 10 10 10 10 10-11 11 11 11 11 11-12 12
# 1 - 2 - 3 - 4 - 5 6 - 7 - 8 -
RET670* - - - - - . -
9 - 10 - 11 - 12
- . -
Position
SOFTWARE #1 Notes and Rules
Version number
Version no
2.0
Selection for position #1.
Configuration alternatives #2 Notes and Rules
Back-up A10
Voltage and tap changer control A25
Single breaker, 2 winding differential A30
Multi breaker, 2 winding differential B30
Single breaker, 3 winding differential A40
Multi breaker, 3 winding differential B40
ACT configuration
ABB standard configuration X00
Selection for position #2.
Transformer protection RET670 2.0
1MRK 504 141-BEN C
Product version: 2.0
ABB 115