Assembly
Assembly Instructions
16
1HSB435410-2 enrev1
4.6 Assembling the operating mechanism
On delivery the operating mechanism has been set and is supplied with the closing
springs correctly adjusted.
Fit the operating mechanism as set out in Figure 4-9.
Fit all bolts and tighten them by hand. Then tighten the bolted joints (1) with a
tightening torque of 79 Nm.
Figure 4-9. Assembly of the operating mechanism.
Item
1 Bolts M12x50
Nuts M12
Washers 13x28x3
10 pcs.
10 pcs.
20 pcs.
TIGHTENING TORQUE
79 Nm
1
1
1
1
1
B10131
2
To Next Page
Loading...
