ABB UMC100.3 - Page 103

Feldbus
address
Motor
current[%]
Motor
current [A]
(average, and
each phase)
Status UMC
Digital Inputs
Status UMC
Digital outputs
User defined
masks(1-5)
From any
menu point
(right hotkey)
from any
menu point
(left hotkey)
1: Motor Management
(e.g. control function)
2: Protection
(e.g. trip class)
3: Communikation
(e.g. bus address)
4: I/O modules
(e.g. DI function)
5: Display
(e.g. language)
6: Maintenance/Service
(e.g. changed parameters)
Main menu
Main Configuration Menu
Voltages*
Active power*
Power Faktor*
Masks on the top level and the main configuration menu masks.
With the right soft key you can enter the selected submenus which are described in the following
sections. The masks shown with a star * are only displayed if the voltage module is present.
103
THE LCD CONTROL PANEL UMC100-PAN