Integration with the GSD File
-
BUS master is necessary. Every PLC (Programmable Logic Controller) or DCS (Distributed Control System), that can be used
properties relevant for operation of the slave are described (e.g. supported baud rates, max. number of modules etc.).
:
> Low Voltage Products and Systems > Control Products > Motor Controllers > Universal Motor Controllers > Software
Integration with the Device Type Manager (DTM)
concept. FDT (Field Device Tool) technology standardises the communication interface between field devices and systems.
For the UMC100.3 a DTM is available which can be ordered separately. Consult the PBDTM manual for more information.
For creating a customer-specific application the DTM must be used! Parameterisation of the control and
29
To Next Page
Loading...
