ABB UNITROL 1020 - Page 152

Chapter 6 - Operation 
144 3BHS335648 E82 UNITROL 1020 User Manual
Adjust Diode Monitoring
Setup \ Diode Monitoring
The window is shown when the CMT1000
is OFFLINE and/or the Rotating Diode
Monitor SW (optional) is available in the
device.
Adjust PSS
Setup \ PSS
The window is shown when the CMT1000 is OFFLINE and/or the Power System
Stabilizer SW (optional) is available in the device.
This window below can only be opened when the device is online and connected. Only
then both configurable test points can be monitored in the CMT oscilloscope.