Contents |
3
Contents
Contact 2
Additional technical information 5
Information in this document 5
Introduction 6
General 6
Introduction to the Energy Management
System home 6
Identification of the eMShome 7
Connections and controls 8
RS485 interfaces 9
System installation 10
Phase rotation 10
Electrical connection of the eMShome for direct
measurement without current transformer 11
Electrical connection of the eMShome for indirect
measurement with current transformers 12
Bus wiring of the wallboxes and the eMShome 13
Termination of the data lines 15
Setting up the wallboxes 15
Cable connection with the computer 16
Configuration via the ABL Configuration Software 17
Starting up the eMShome 19
Starting the eMShome web interface 20
Structure of the web interface 21
Checking and updating the device firmware 22
Setup via the eMShome web interface 23
Description of the individual apps of the eMShome 26
Dashboard 26
Messages – Health Check app 27
Smart Meter app 29
Wallbox app 30
Data store app 35
Device settings app 39
Appendix 48
Technical specifications 48
Operation of the eMShome at an ambient
temperature of 55°C 49
Data cable recommendations 49
PIN allocation within the system 49
LED statuses 49
Functions of the reset button 50
Licences 50
Abbreviations 51
Error codes 51
OBIS system of indicators 53
Data Storage app – CSV export format 54
FAQs – Frequently Asked Questions 58
Disposal notice 59
Intellectual property & copyright 59
To Next Page
Loading...