Appendix – OBIS system of indicators |
53
Error code Error description and remedy
201 The CSV file could not be exported via FTP/SFTP. Please check the FTP/SFTP configuration in the
eMShome and the configuration of the FTP/SFTP server.
If the error persists, please create the system logs and contact Customer Service or the FTP
provider.
202 The CSV file could not be exported via email. Please check the email configuration in the
eMShome and the configuration of the SMTP server.
If the error persists, please create the system logs and contact Customer Service or the email
provider.
203 The error “Error code 203: 1-minute aggregation failed” cannot be resolved by the user.
Please contact Customer Service.
204 The error “Error code 204: 15-minute aggregation failed” cannot be resolved by the user.
Please contact Customer Service.
205 The error “Error code 205: Daily aggregation failed” cannot be remedied by the user.
Please contact Customer Service.
206 The error “Error opening the database” cannot be resolved by the user.
Please contact Customer Service.
Error codes – Web application
Error code Error description and remedy
500 The error “End of service life of flash memory” cannot be resolved by the user.
Please contact Customer Service.
OBIS system of indicators
OBIS codes are used for data transmission and differentiation of the various measurement data of a data source.
OBIS stands for Object Identification System and is used for electronic data communication in the energy market.
OBIS indicators consist of six value groups (A-F), which are combined to derive a specified value. They are represent-
ed in the form A-B:C.D.E*F.
The specific OBIS indicators used in eMShome are described in this appendix depending on the data source (see Ap-
pendix “OBIS system of indicators” onpage53). The basis is the OBIS system of indicators, version 2.0 (last updat-
ed 2 February 2009), which is based on DIN EN 62056-61:2007-06 and can be found at edi-energy.de.
The individual groups are explained below in the context of the eMShome.
Group A (medium)
A = 1 (electricity)
Group B (channel)
Used to distinguish between the three possible data sources:
For smart meter values: B = 0
Group C (measured variable)
Key value of the resulting measured variable according to the OBIS system of indicators
Group D (measurement type)
Key value of the applied measurement type according to the OBIS system of indicators
To Next Page
Loading...
Need help?
General