Introduction – Identification of the eMShome |
7
The following measured values are recorded and stored by the eMShome:
Active power
Reactive power
Apparent power
Active energy (electrical work)
Reactive energy
Apparent energy
Sum of all phases and single phases
Phase voltages
Phase currents
Power factor
NOTE
Compatibility of the eMShome with the eMH1 model series
Please note that the eMShome is currently only compatible with the eMH1 Wallbox model series listed below.
1W2201
1W2221
Identification of the eMShome
A rating plate attached to the side of the eMShome and
another supplied in the package are used for identification
purposes. The rating plate contains the following important
information:
Serial number
MAC address
Factory-assigned password for logging in to the user
interface of the eMShome
Always check the rating plate before installation.
NOTE
Type rating on the packaging
There is another rating plate on the packaging of the eMShome which contains general information such as the
product number and serial number. However, it does not show any access data for communication between the
integrated web server of the eMShome and a computer.
H:\_Key Acoount\ABL\Branding\ABL_Etiketten mit Anpassungen_18Nov2021.docx / 23.11.21 / Ober, Claudia Seite 1 von 1
Typenschild
Beipackschild
Verpackungsschild
To Next Page
Loading...
Need help?
General