Description of the individual apps of the eMShome – Wallbox app |
31
Detailed view
For each connected charging device, a detailed view can be opened by clicking on the info button i. There are three
sections here:
Status The status of the charging device is specified here in text form.
Current charging process The measured values for the current charging process are displayed here:
The duration indicates how long the current charging process has been
active.
Maximum current and Minimum current indicate the maximum and
minimum possible charging current per phase of the vehicle. These values
depend on the connected vehicle and are determined during the initialisa-
tion phase.
Charged energy indicates how much energy in kWh has already been
charged during the current charging process.
Charging current per phase The current charging current per phase is broken down here.
Wallbox charging mode
The Wallbox charging mode card allows you to select where the electricity for charging the electric vehicles is to
be obtained from.
If Don't charge is selected, no connected vehicle is being charged.
If Mains charging is selected, the vehicle is being charged at all times, regardless of whether photovoltaic
power is available or the current is drawn from the grid. Select this mode if no photovoltaic system is available or
if the vehicle is to be fully charged by a certain time in the near future.
To Next Page
Loading...
Need help?
General