Accu-Chek ACTIVE Owner's Booklet

▲
!
16
Chapter 1: Understanding Your New System ACCU-CHEK Customer Care Service Center 1-800-858-8072
Coding the Meter
Change the code key every time you open a new box of test strips .
Be sure the code key matches the code on the test strip container . If they don’t match , you could get inaccurate results .
1 . W ith the m eter off, slide the orange code key into the code key slot.
It should eas ily snap into place.
2 . W hen you insert a test strip ( see Chapter 3, “ R unning a Blood S ugar
Test” ) , m ake sure the cod e on the m eter m atches the code on the
test str ip container.
3 . Thro w away the old code key.
N otes:
• If “code---” appears on the display, re m ove the test strip to
turn off the m eter, m ake sure the code key is all the way in,
then turn on the m eter again.
• D on’t force the code key into the m eter; it only goes in one
way.
• If the code nu m ber on the display does not m atch the code
nu m ber on the test strip conta iner, call th e ACC U -C H EK
Custo m er Care S ervice Center at 1-800-858-8072 .
Code Key
( included with
test strips )

Accu-Chek ACTIVE Specifications

General

Brand	Accu-Chek
Model	ACTIVE
Category	Blood Glucose Meter
Language	English