27
Chapter 3: Testing Your Blood Sugar ACCU-CHEK Customer Care Service Center 1-800-858-8072
Follow Steps 1 through 6 of “Running a Blood Sugar Test
,
”
Chapter 3
,
then:
1
.
Take the test st rip out of the
m
eter.
2
.
Touch the center of the square orange pad to the drop of blo od.
D
o not bend the test strip.
3
.
W
ith in 20 secon ds, insert the test strip, with the orange pad
facing u p, until it will go no further into the
m
eter.
D
o not bend
the test strip.
(
The arrowheads are al
m
ost no longer visible
when the test strip is inserted correctly.
)
4
.
An hourglass sy
m
bol appears on the screen, then the
test result appears.
5
.
To re
m
ove the lancet, take off the lancet device cap and point
the lancet end away fro
m
yourself.
6
.
S
lide out the ej ector to discharge the lancet into an appropriate
container for sh arp objects.
For more information about your test results
,
see Chapter 3
,
“Understanding Your Test Results
.
”
Applying Blood with Test
S
tr ip
O
utsi de of th e Meter
D
o not operate the
m
eter without the test strip guide attached. For
m
ore infor
m
ation, see Chapter 5,
“Maintenance an d Troublesh ooting.”
D
o not bend the test strip.