AccuEnergy Acuvim II series User Manual

215
Fig 5-71
e). Set Subnet Mask in the third setting page, such as 255.255.255.0. Press “V/A”
key to go to the setting page. Users may set the parameters in the area pointed
out in Fig 5-79. The cursor starts at the rst digit. After setting the Subnet Mask,
press the "V/A" key to accept. Press the "P" key again to go to the fourth setting
page for Gateway.
Fig 5-72

AccuEnergy Acuvim II series Specifications

General

Brand	AccuEnergy
Model	Acuvim II series
Category	Measuring Instruments
Language	English