AccuEnergy Acuvim II series - Page 224

216
f ). Set Gateway in the fourth setting page, such as 192.168.1.1. Press the "V/ A"
key to go to the setting page. Users may set the parameters pointed out in Fig
5-80. The cursor starts at the rst digit. After setting the Gateway, press the "V/
A" key to accept. Press the "P" key to go to the fth setting page for DNS Primary
Server.
Fig 5-73
g). Set DNS Primary Server in the fth setting page, such as 202.106.0.20. Press
the "V/A" key to go to the setting page. Users may set the parameters pointed
out in Fig 5-81. The cursor starts at the rst digit. After setting the DNS Primary
Server, press the "V/A" key to accept. Press the "P" key to go to the sixth setting
page for DNS Secondary Server.