Acer AOD270 - DOS Flash Utility

System Utilities 2-15
DOS Flash Utility 0
Perform the following to use the DOS Flash Utility :
1. Press
F2 during boot to enter Setup Menu.
2. Select Boot Menu to modify boot priority order.
Example: If using USB HDD to Update BIOS, move USB HDD to position 1.
Figure 2-12. BIOS Boot
3. Copy ZE7_025.exe to a bootable USB HDD.
4. Insert the USB HDD and reboot computer.
5. Execute ZE7_025.exe to update BIOS.
6. Flash is complete when the message, Flash Programming Complete is shown.
System will restart automatically when finished.
NOTE:
NOTE:
If AC power is not connected, the following message is shown
(Figure 2-13). Plug in the AC power to continue.
Figure 2-13. AC Power Warning