Acer RL100 - Power Management Setup

Chapter 2 17
Power Management Setup
Parameter Description Option
ACPI Suspend Mode Select an ACPI state used for System Suspend. S3 (STR)
S1 (POS)
Deep Power Off Mode Enables or disables the deep power off mode. Enabled
Disabled
Power On by RTC Alarm Enables or disables real time clock (RTC) to generate a wake event. Enabled
Disabled
Power On by Onboard LAN Enables or disables an onboard LAN controller to generate a wake
event.
Enabled
Disabled
Wake Up by USB KB/Mouse Enables or disables to wake up the system from a power saving mode
using a USB keyboard or mouse.
Enabled
Disabled
Restore On AC Power Loss Enables or disables the system to reboot after a power failure or
interrupt occurs.
Power Off
Power On
Last State
ACPI Suspend Mode
Deep Power Off Mode
Power On by RTC Alarm
Power On by Onboard LAN
Wake Up by USB KB/Mouse
Restore On AC Power Loss
:Move Enter:Select
F1:General Help F9:Load Default Settings
+ :Value//- ESC Exit:
F10:Save & Exit Setup
Help Item
[S3 (STR)]
[Enabled]
[Disabled]
[Disabled]
[Enabled]
[Last State]
CMOS Setup Utility - Copyright (C) 1985-2010, American Megatrends, Inc.
Power Management Setup
Select the ACPI state
used for System Suspend.