ACN IRIS 3000 - Using the Basic Functions of Your Videophone; Placing a Call; Placing a Call from Call Log

2. Using the Basic Functions of your
Videophone
2-1. PLACING A CALL
2-1-1. P
LACING A CALL USING THE KEYPAD
Pick up the handset or press the “Speaker” button
• Enter the phone number
• Press the “Call” button
NOTE: Refer to Section 3-2 for instructions on entering characters. The keypad tones are switched off by default.
If you would like to switch on the keypad tones, refer to Section 3-6-1-3 Sound.
2-1-2. PLACING A CALL IN STANDBY MODE (WHEN THE LCD SCREEN IS OFF)
Enter the first digit of the phone number
• A window will appear on the screen
• Enter the remaining digits of the phone number
• Press the “Call” button
2-1-3. PLACING A CALL FROM YOUR CALL LOG
Press the “MENU” button
• Use the navigation buttons “ ” to select “Call Log”
• Press the “OK” button
• Select the category of the number you would like to call (Total Calls, Answered Calls, Dialled Numbers, Missed Calls) by using the
navigation buttons (for example: select “Dialled”)
• Press the “OK” button
• Use the navigation buttons to select the desired number
• Press the “OK” button
• Use the navigation buttons to select “Make A Call”
• Press the “OK” button
9