2. Measurement of vibration acceleration level (Lva)
This level is the vibration level when the frequency correction is Flat.
<Operation>
1) The operation is the same as that in the previous item of “Measurement of vibration level
(Lv).”
2) Set with the Lv, Lva key so that the vibration display mode becomes Lva display.
<Display>
When
Lv
,
Lva
key is inputted, the display changes from
Lv
to
Lva
.
･ Other displays and operations are the same as that in the “Measurement of vibration level
(Lv).”
1s 000h00m00s
Ｘ
L
Ｖａ
dB
100.0
50 110
Manu
To Next Page
Loading...
