Before use
1. Overview
The Vibration Level Meter is equipped with vibration level Lv, vibration acceleration level Lva,
power average level Lveq, hour rate vibration level Lx and the RS-232C interface as standard, and
can also be connected with an external CPU.
(Version upgrade allows CPU connection-compatibility)
Measurement results can be liquid-crystal-displayed by a bar graph and numerical values.
2. Features
● 5 arbitrarily selected values of maximum and minimum values for hour rate vibration levels
(Lx) can be measured at one time.
● Power average level (Leq) can be measured.
Environmental vibration required for occupational health can be measured.
● Wide range of linearity 75dB.
● RS-232C Function mounted. Data can be processed by personal computer (option).
● Memory function mounted. Approximately 550 pieces of data can be memorized at maximum.
● Eye-friendly and easy-to-look at screen. Large-scale display screen with backlight function.
3. Configuration
(1) Vibration Level Meter TYPE 3233 1
(2) Acceleration pickup TYPE 7833 1
(3) Cable (3m) BC-0233 I-3 1
(4) BNC pin cord BC-0071 1
(5) Carrying case 1
(6) Instruction manual 1
(7) Option
・AC adaptor AC-1026
・Extension cable (5m～100m) BC-0233G-5～100
・Output cable (X, Y) BC-0073
・Interface cable (PC side connector D-sub 9pin) BC-0026PC
・Data management software (with Instruction manual) NA-0233-3
To Next Page
Loading...
