10
3.2. Connecting via Intel® WiDi App (Gen 4)
Note: Connection using Intel WiDi (4.x.x.x) is available when the receiver’s AGO feature is
disabled. Refer to Section Error! Reference source not found.Error! Reference source not
found. for details about AGO.
This section explains how to connect a device running Intel's WiDi application to the receiver.
Follow the procedure below to connect your device to the Receiver:
1. Launch the Intel Wireless Display application on the device. To find the application, go
to Windows Search on the device and search for “Intel WiDi”.
2. The Intel WiDi application scans for available receivers automatically. Select your
receiver and click Connect. (The “Connect Automatically” checkbox is optional.)
Note: If your receiver is not found, you can click the Scan button to scan again.
3. A PIN entry box is displayed on the screen of the WiDi device. And you can see a PIN
code and the host name (QA-PC01 in this example) of the connecting device displayed
on the HDTV. Type the PIN in the PIN entry box on the WiDi device, and then click
Continue.
To Next Page
Loading...
