39
2. Go to the TV Screen Size (Overscan Settings) line, and select the desired option in the
TV Screen Size (Overscan Settings) drop-down box.
The value for TV screen size ranges from 0 to 25. The larger the value is, the bigger
the screen will be.
Allow source device to override overscan value: When this option is enabled
(checked), the overscan value is in consistence with the setting on the source device.
Otherwise, the overscan value is in consistence with the setting on the receiver.
3. Click the Apply button, and then click OK on the pop-up message box to confirm.
5.3.13. Setting up Output Aspect Ratio
If the output does not fit your display screen due to wrong aspect ratio, you can try selecting
a proper aspect ratio for your display screen.
Follow the procedure below to adjust the aspect ratio for your TV screen:
1. Go to the Features tab page by clicking the Features tab.
2. Go to the Aspect Ratio line, and select a proper option in the Aspect Ratio drop-down
box.
In case of selecting the 4:3 option, you can also fine tune the horizontal and vertical offsets.
To Next Page
Loading...
