34
1. Go to the Features tab page by clicking the Features tab.
2. Select the desired option in the HDMI/VGA Port Power management drop-down box.
There are three options: Always On, Screensaver, and HDMI Off.
Always On: Selecting this option, the HDMI output is always on.
Screensaver: Selecting this option, the system will run the screensaver after the defined
idle time expires. Users can define the idle time in the Wait time box.
Note: 5-9999 seconds are allowed.
HDMI Off: Selecting this option, the HDMI output will be turned off after the defined idle
time expires. Users can define the idle time in the Wait time box.
Note: 5-9999 seconds are allowed.
3. Click the Apply button, and then click OK on the pop-up message box to confirm.
5.3.7. Setting up WiDi Lower Bandwidth
The WiDi Lower Bandwidth is used to control video quality and speed.
Follow the procedure below to set up WiDi Lower Bandwidth for the receiver:
1. Go to the Features tab page by clicking the Features tab.
To Next Page
Loading...
