44
5.3.18. Setting up Autonomous Group Owner (AGO)
The Autonomous Group Owner function (enabled) allows the receiver to be the group owner
during a p2p connection negotiation. In this case, the receiver can determine the channel for
communication.
In a Wi-Fi P2P group, the group owner operates as an access point and all other devices are
clients. After AGO is enabled, the receiver works as the P2P group owner.
To use the Managed Meeting (Intel® Pro WiDi) function, AGO must be enabled.
Follow the procedure below to set up the receiver’s AGO:
1. Go to the Network Settings tab page by clicking the Network Settings tab.
2. Set the Autonomous Group Owner (AGO) to Enable or Disable.
There are two options: Enable and Disable.
Enable: The receiver will become the group owner of the session. The communication
channel can be defined by the receiver. And the Managed Meetings feature is available.
To Next Page
Loading...
