ActionTec ScreenBeam Pro SBWD100B - When SSID Broadcast Is Disabled

26
4. Access the URL address ("http://192.168.51.1" in this example) with a web browser on
the laptop.
Note: You can modify this URL address in the local management web page. Refer to Section
5.3.22. Setting up Wireless Network Parameters for detail.
5. The web server login interface is displayed. Type the username and password in the
Username and Password boxes and click the Login button.
Note:
 By default, the Username is “Administrator” and Password is “WiDi”. You can modify
the username and password in the local management web page. Refer to Section 5.3.2.
Setting up Login Username and Password for the Local Management for detail.
 The username and password are case sensitive.
5.1.2.2. When SSID Broadcast is Disabled
Follow the procedure below to log into the local management web server:
1. You can find the receiver’s SSID in the lower part of the Ready to connect screen.
2. Right-click the Wi-Fi network icon in the Notification Area of your source device and select
Open Network and Sharing Center.