Need help?Do you have a question about the ACUTRONIC MONSOON and is the answer not in the manual?
Lists critical safety warnings and precautions for operating the ventilator.
Outlines requirements for regular safety inspections and servicing by trained professionals.
Covers safe operating practices, explosion risks, electrical connections, and liability clauses.
Details the functions of various elements on the ventilator's control panel display.
Defines the limit for peak inspiratory pressure and its impact on ventilation.
Explains the pause pressure limit and its role in monitoring patient respiratory tracts.
Describes the SIPL limit for superimposed ventilation and its parameter settings.
Outlines the essential steps for preparing the ventilator before initial use.
Details the procedure for testing pressure limits using a test lung before patient use.
Explains how to adjust various ventilation parameters using the control panel.
Details the setup and functionality of the Superimposed Pressure Limit (SIPL).
Explains how to activate and configure the Double Jet ventilation mode.
Explains how to adjust oxygen concentration for laser procedures.
Guides on activating and using the optional etCO2 measurement module.
Describes the two operating modes: Automatic and Manual, and their selection.
Lists patient alarms triggered by limit violations or water supply issues, with causes and instructions.
Details system alarms caused by power supply or hardware faults, with causes and instructions.
Lists the adjustable parameters and their operational ranges for the ventilator.
To Next Page
General