ACUTRONIC MONSOON - Settings Menu Options

Instructions for use MONSOON 5.6e
29/61 20/09/2010
Settings
The „Settings“ menu allows the following to be
adjusted:
- etCO
2
module ON / OFF
- etCO
2
interval measurement:
measurement automatically starts at the
selected intervals during Jet operation
- etCO2 measuring unit
- Manual oxygen sensor calibration
- Application selector (MONSOON+):
OR mode -> SIPL not available
ICU mode -> SIPL available
- Display contrast
- Laser O
2
level:
O
2
value default for “ Laser on/off ” key
- Alarm volume
Language
Set the desired language.
Maintenance
The “Maintenance” menu is password protected.
Only ACUTRONIC Medical Systems AG trained
staff will have the password to access:
 Calibrations
 Time / Date
 Factory settings
 Demo mode