Instructions for use MONSOON 5.6e
20/09/2010
60/61
Replacing Fuses
Principle:
Always replace fuses with fuses of identical rating. We recommended having fuses replaced by train-
ing service staff.
The mains fuses are located inside the MONSOON’s mains input socket at the back of the device.
Procedure:
Unplug. Use a screwdriver to loosen the locking mechanism marked with arrows and open drawer.
Remove fuse and replace with a fuse of identical rating (T3.15A H). Push drawer into mains input sock-
et. Be sure the locking mechanism catches.
To Next Page
Loading...
General