160
20.4 Dynamic Pupillometry Application (DP-App)
This function provides information regarding the pupils response (diameter during time)
when the eyes of the patient are stimulated with a known visible and programmable white
light created by the 2WIN.
The visible stimulus light can be programmed by the operator in intensity and duration.
Results are expressed in a graphical image showing the pupil response to the visible
stimulus and through some parameters showing the estimation of pupil response time,
reaction time and slopes of the changes of diameter versus time.
Dynamic pupillometry Application activation
After the installation this Application must be activated to be utilized.
Activation: click the 2WIN BUTTON A ( ) 2WIN Applications screen will be shown to
display.
Doing this, it is possible to navigate and to see all the installed Applications into the device.
By clicking with the cross BUTTON on the Dynamic Pupillometry Application icon, this
Application will be the principal one in Main Display and it will be set first in Auxiliary
Windows automatically.
Dynamic Pupillometry exam and modes
There are three operative modes for this Application:
To Next Page
Loading...
Need help?
General
