75
Custom RGB sequence
By creating in the root folder of the SD card a file named
rgbCustomSequence.txt
and enabling custom sequences in the menu, the interactivity light can be personalized.
The file shall contain 30 or less rows (exceeding rows will be ignored) coded as follows:
each row contains 4 numbers
• first number must be in the range 0-5 and codes the mode:
0=off
1=rotating rgb
2=fixed white
3=rotating black on blue
4=fixed green
5=flashing red
• second number is a parameter in the range 50-1000: for modes 1 and 3 it represents the
delay, that is the reciprocal of rotational speed
• third number is the intensity, in the range 0-255
• fourth number is the duration (of the mode described by the line), in the range 1-30
For example:
1 100 10 2
0 0 0 1
4 0 15 1
3 500 20 2
3 200 10 2
will perform:
2 seconds rotating with a 100ms delay and intensity 10
1 second OFF
1 second fixed green with intensity 15
2 seconds black rotating on blue with a 500ms delay and intensity 20
2 seconds black rotating on blue with a 200ms delay and intensity 10
10.21 Notification Center
This feature allows the real time monitoring of 2WIN messaging and logs. There are reported
3 different types of information: notifications on the measurements, notifications on the WiFi
To Next Page
Loading...
Need help?
General
