76
networking status and logins and notifications on the additional software Applications
installed.
When a new notification is added to Notification Center, 2WIN logo will be shown with a red
background.
The notifications are stored in the Notification Center in a recursively way, the last 20
information are always showed.
In order to see the Notification Center press and hold the “eye” button, you can then consult
the list of notifications. In order to exit from the center just press the “esc/Power” button.
10.22 Age Selection and Screening Mode
If date of birth is not inserted, an age interval can be selected: from the home display, in the
Cross button keep pressed the right button to display the “Age Selection”, which is called
Screening Age from software version 4.1 and above.
Please take care to modify the patient age before saving the 2WIN measurement. The 2WIN
results in young patient with hyperopia error can be dependant to the patient's age. To
change the patient age “long-press” to the RIGHT button of the joystick and follow the
instructions in the 2WIN display.
To select the different Screening modes, use the following buttons:
To Next Page
Loading...
Need help?
General
