38
10 Operative instructions
(Please refer to Paragraph 8.5 and 8.6 for fast reference)
Power ON / Power OFF
To power on the 2WIN device, push the BUTTON A.
To power on the 2WIN-S device, push the on/off button on the Control Panel of the
KALEIDOS.
(To turn OFF the device long press the BUTTON A then, when the question “Are you sure
you want to quit?” appears, push the CROSS BUTTON, centre, to answer OK)
While the instrument is on, the monitor reduces the brightness after 30 seconds of inactivity.
Then the monitor switches off after 30 seconds more. After 600 seconds, the device turns
on, emits a sound alert, and shows a warning telling that after 30 seconds it will automatically
shut down.
NOTE: 2WIN-S has not auto-shutdown timer.
Default Autoshutdown Time is 10 min.
Autoshutdown time (changeable from a minimum of 10 to a maximum of 180 minutes, in
steps of 5 min), can be customized by selecting from Menu > Settings > Aux >
Autoshutdown Time.In order to operate the instrument it is important to execute the
following four steps:
a) Environment setup
b) Instrument setup
c) Preparation of the patient
d) Measurement
To Next Page
Loading...
Need help?
General
