99
12.2 KALEIDOS: How to start
WARNING! When 2WIN is used in 2WIN-S configuration, connected to the
battery pack through the USB cable, 2WIN’s internal battery must be removed.
To switch ON/OFF the system
1. Short press the switch-on/off button to switch the sys-
tem on. A beep sound stands for turning on the system.
2. Hold for 2s the switch-on/off button to switch the sys-
tem OFF.
2.1 A longer press will force power – OFF
Note: Do NOT switch the 2WIN on in 2WIN-S configuration
using the BUTTON A (See Paragraph 8.6 - Interfaces).
To charge the system
1. Connect the provided power supply cable to the INPUT 18V – 25A
2. Connect the other end of the power supply to the line.
3. In order to monitor the battery charge level, press the battery charge button.
Configuration steps
Long press for 4s of button 2 in the back of the KALEIDOS. The 2WIN enters in pairing
mode, waiting for the 2WIN App connection.
To Next Page
Loading...
Need help?
General
