10
Chapter 1 - Welcome
GFR-700 Owner’s Manual
Rear Panel Overview
The following is an overview of the GFR-700 rear panel.
1 Tuner inputs
• AM - Connects to an AM loop antenna (in-
cluded).
• FM - Connects to an FM antenna (includ-
ed).
2 Zone 2 outputs
• Variable (R/L) - Connects to the line in
-
puts of a power amplifier in a second
room. With this connection, use the GFR-
700 remote to adjust the volume.
• Fixed (R/L) - Connects to the line inputs
of an audio receiver in a second room.
With this connection, use the secondary
receiver’s controls to adjust the volume.
• 12V DC trigger - Use to power on the sec-
ondary amplifier/receiver when the Room
2 button is pressed.
3 Tape inputs/outputs
• In (R/L) - Connects to the line outputs of
a tape player or other analog audio source
component.
• Out (R/L) - Connects to the line inputs of
a tape recorder or other analog audio re
-
cording component. Press the Tape button
on the remote control or front panel to
monitor the tape output.
4 CD inputs (R/L)
Connects to the line outputs of a CD player or
other analog audio source component.
5 Ext 7.1 inputs
Connects to the multi-channel analog outputs
of a DVD, DVD-Audio, or SACD player.
To Next Page
Loading...
