ADLINK Technology VPX3-TL BIOS - Page 23

23
VPX3-TL BIOS
BIOS Item Options Description
ms, 5 ms, 6 ms, 7 ms,
8 ms, 10 ms
1ms is default. Range from 1ms to 10ms,
except for 9ms. 9ms has no valid encoding
in the MSR definition.
TDC Lock
Enabled
Disabled
TDC Lock
VccIn Demotion Override
Enable
Enabled
Disabled
Enable VccIn Demotion Override
Configuration.
CPU – Power Management Control Æ CPU VR SettingsÆ RFI Settings
Aptio Setup – AMI
Advanced
RFI Domain
RFI Current Frequency 139.800MHz
RFI Frequency 0
Spread Spectrum [Enabled]
RFI Spread Spectrum [1.5%]
RFI Mitigation [Disabled]
><: Select Screen
^v: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Default
F10: Save & Exit
ESC: Exit
BIOS Item Options Description
RFI Current Frequency 139.800MHz
RFI Frequency
0 Set desired RFI frequency, in increments
of 100KHz. (For a frequency of 100.6MHz,
enter 1006.)
Spread Spectrum
Enabled
Disabled
Enable or Disable the Spread Spectrum
RFI Spread Spectrum
0.5%, 1%, 1.5%, 2%,
3%, 4%, 5%, 6%
Set the Spread Spectrum
RFI Mitigation
Enabled
Disabled
Disable - DCM is the IO_N default; Enable -
Enable IO_N DCM/CCM switching as RFI
mitigation.