ADLINK Technology VPX3-TL BIOS - Page 42

42
VPX3-TL BIOS
BIOS Item Options Description
EC_GPI0
Interrupt trigger
No Interrupt
Indicates whether the GPIO Pin is
interrupted. Write 0x00 to clear the
interrupt and EC_GPIO_INT will be
changed to high level
EC_GPI1
Interrupt trigger
No Interrupt
Indicates whether the GPIO Pin is
interrupted. Write 0x00 to clear the
interrupt and EC_GPIO_INT will be
changed to high level
EC_GPI2
Interrupt trigger
No Interrupt
Indicates whether the GPIO Pin is
interrupted. Write 0x00 to clear the
interrupt and EC_GPIO_INT will be
changed to high level
EC_GPI3
Interrupt trigger
No Interrupt
Indicates whether the GPIO Pin is
interrupted. Write 0x00 to clear the
interrupt and EC_GPIO_INT will be
changed to high level
EC_GPO0
Low
High
Indicates whether the GPIO Pin is
interrupted. Write 0x00 to clear the
interrupt and EC_GPIO_INT will be
changed to high level
EC_GPO1
Low
High
Indicates whether the GPIO Pin is
interrupted. Write 0x00 to clear the
interrupt and EC_GPIO_INT will be
changed to high level
EC_GPO2
Low
High
Indicates whether the GPIO Pin is
interrupted. Write 0x00 to clear the
interrupt and EC_GPIO_INT will be
changed to high level
EC_GPO3
Low
High
Indicates whether the GPIO Pin is
interrupted. Write 0x00 to clear the
interrupt and EC_GPIO_INT will be
changed to high level
COM2 port mode RS232, RS485, RS422 COM2 port mode
Maintenance port mode RS232, UART Maintenance port mode
DP++ manual mode
HDMI with Passive
Dongle, Displayport
DP++ manual mode
PCIe Scan Delay
0 System delay before PCIe scan. Unit is
second and maximum value is 60 seconds