ADLINK Technology VPX3-TL BIOS - Page 60

60
VPX3-TL BIOS
> Software Feature Mask
Configuration
Submenu
Aggressive LPM Support
Disabled
Enabled
Enable PCH to aggressively enter link
power state.
SATA Controller Speed Default, Gen1, Gen2,
Gen3
Indicates the maximum speed the SATA
controller can support.
Serial ATA Port 0 Info-only
Software Preserve Info-only
Port 0
Disabled
Enabled
Enable or Disable SATA Port
Hot Plug
Disabled
Enabled
Designates this port as Hot Pluggable.
Configured as eSATA Info-only
External
Disabled
Enabled
Marks this port as external.
Spin Up Device
Disabled
Enabled
If enabled for any of ports Staggerred Spin
Up will be performed and only the drives
which have this option enabled will spin
up at boot. Otherwise all drives spin up at
boot.
SATA Device Type
Hard Disk Drive
Solid State Drive
Identify the SATA port is connected to
Solid State Drive or Hard Disk Drive
Topology
Unknown
ISATA
Direct Connect
Flex
M2
Identify the SATA Topology if it is Default
or ISATA or Flex or DirectConnect or M2
SATA Port 0 DevSlp
Disabled
Enabled
Enable/Disable SATA Port 0 DevSlp. For
DevSlp to work, both hard drive and SATA
port need to support DevSlp function,
otherwise an unexpected behavior might
happen. Please check board design before
enabling it.
DITO Configuration
Disabled
Enabled
Enable/Disable DITO Configuration
DITO Value 625 DITO Value
DM Value 15 DM Value