ADT Safewatch Pro 3000 User Manual

Safewatch Pro 3000 Installation Instructions
12-2
Touchpad Functions
The following is a brief list of system commands. For detailed information concerning system
functions, refer to the User's Manual.
Function Description
Silence alarms
Pressing any key will silence the touchpad sounder for 10 seconds. Disarming the
system will silence both touchpad and external sounders.
Quick Arm If
enabled (field
✱
21), you can press [#] in place of the system's security code, plus the
desired arming key (Away, Stay, Instant)
Single-Button arming If programmed (*57 Function Key menu mode), lettered keys A-D can be used for
arming, using options 3-AWAY, 4-STAY, 5-NIGHT-STAY, or 6-Step-Arming
If used, no security code is required to arm the system.
Alarm Memory
When the system is disarmed, any zones that were in an alarm condition during the
armed period will be displayed. To clear this display, simply repeat the disarm
sequence (enter the security code and press the OFF key) again.
Arming Away Enter code + AWAY [2] or simply press appropriate lettered key on the touchpads (see
“Single-Button Arming” above)
Arming Stay Enter code + STAY [3] or simply press appropriate key on the touchpads (see “Single-
Button Arming” above).
Arming Instant Enter code + INSTANT [7]
Disarming Enter code + OFF [1].
Bypassing Zones Enter code + BYPASS [6] + zone number(s).
Forced (Quick) Bypass To automatically bypass all faulted zones, use the “Quick Bypass” method. Enter code
+ BYPASS + [#], then wait for all open zones to be displayed. Arm when display
indicates “BYPASS” and “READY TO ARM”.
Chime Mode Enter code + CHIME [9]. To turn chime off, enter code + CHIME again.
Activate Output Devices If relay outputs (via a 4204, or 4229), or Powerline Carrier devices are used, two
touchpad entries available to the user are included. If programmed, these entries can be
used to manually activate or deactivate the device(s) for starting or stopping some
action, such as turning lights on or off, etc. These touchpad entries are:
[Security Code] + # + 7 + [2-digit Device #] activates (starts) that device.
[Security Code] + # + 8 + [2-digit Device #] deactivates (stops) that device.
SUMMARY OF ARMING MODES
Features for Each Arming Mode
Arming
Mode
Exit Delay Entry Delay Perimeter Armed Interior Armed
AWAY Yes Yes Yes Yes
STAY Yes Yes Yes No
INSTANT Yes No Yes No

ADT Safewatch Pro 3000 Specifications

General

Keypads	Supports multiple keypads
Communication	Landline, cellular
Remote Access	Via ADT Pulse (if subscribed)
Type	Wired
Power Supply	battery backup
Compatibility	ADT Monitoring Services
Sensors	Door/Window, Motion
Installation	Professional
Backup Battery	Yes