Adtech ADT-CNC4620 User Manual

Adtech CNC Technology Co., Ltd. 9. Program saving & editing
- 34 -
Management Parameter Interface
Tool magazine parameters
Tool magazine parameters collect the parameters that the tool magazine requires. The specific meaning of the parameters
should be determined by the tool magazine of the machine tool, and therefore should refer to the instructions provided by the
machine tool manufacturer.
Principal axis parameters
Principal axis parameters are the set of electrical characteristics of servo and common principal axes. The specific
application also depends on the principal axis selection of the machine tool manufacturer. The servo parameters and axis
parameters have the same meaning, and therefore please refer to the description of axis parameters.
Principal axis parameter interface is shown below:
Principal Axis Parameters Interface
IO configuration parameters
IO configuration parameters are the assignment of hardware interfaces. This parameter set is the IO pin sequence specified
by the system’s IO function numbers, which will improve the system flexibility. Please refer to System Parameters for the
specific meaning of the parameters.
IO configuration parameter interface is shown below:

Adtech ADT-CNC4620 Specifications

General

Brand	Adtech
Model	ADT-CNC4620
Category	Controller
Language	English