Adtech ADT-CNC4620 User Manual

Adtech CNC Technology Co., Ltd. 11. Program saving & editing
- 72 -
020 axis control composite
Range : 0~1
Unit : None
Authority : Super user
Default : ON/1
Effective time : Instant
Note : Used to configure whether the key for axis motion on the control panel is
enabled.
This parameter is used to shield the composite function of the key for axis
motion on the NC panel and reduce the possibility of misoperation when
additional panel is used. However, if no additional panel is used, this
parameter must be enabled, or else the axis motion can’t be controlled
through the key.
021 additional panel enable
Range : 0~1
Unit : None
Authority : Super user
Default : OFF/0
Effective time : Instant
Note : Used to configure whether NC uses additional panel, which must be ADT
matching additional panel, or compatible with the interface of same
protocol.
If additional panel is used, the system testing info enable must be
deactivated (P3.19).
022 sys tool outlay enable
Range : 0~1
Unit : None
Authority : Super user
Default : OFF/0
Effective time : Instant
Note : Used to configure the ATC function of the system, which is achieved by
calling out T_FUNC.NC or not.
11.5 Tool magazine parameters (P4.)
001 Customized by manufacturer
Range :
Unit :
Authority : Operation admin or higher
Default :
Effective time : Instant
Note : This parameter is determined by tool magazine design of each machine
tool manufacturer. Please refer to the machine too manuals for details.

Adtech ADT-CNC4620 Specifications

General

Brand	Adtech
Model	ADT-CNC4620
Category	Controller
Language	English