Adtech CNC9650 User Manual

ADTECH9 Series CNC Maintenance Manual
- 7 -
1. System technical characteristics
1.1 System technical parameters
Function Name Specification
Control axis
Control axes
4 axes (CNC9640 series)
5 axes (CNC9650 series)
5 axes (CNC9810 series)
6 axes (CNC9960 series)
Bus axes (CNC9810E) up to 12 axes
Simultaneous control axes
4 axes linear interpolation (CNC9640 series)
6 axes linear interpolation (CNC9960 series)
5 axes linear interpolation (CNC9810 series)
5 axes linear interpolation (CNC9650 series)
2 axes arc interpolation
Input instruction
Minimum setting unit 0.001 mm
Minimum moving unit 0.001 mm
Maximum instruction value ±9999.999 mm
Feeding
Fast feeding speed
X axis, Y axis, Z axis, A axis: 9999 mm/min
(maximum)
Feeding speed range
Per minute 1~9999 mm/min
Per rotation 1~500 rpm
Automatic acceleration/deceleration Yes
Feeding speed rate 10~150%
Manual
Continuous manual feeding, Yes
Returning to reference point manually
All control axes return to reference point
simultaneously
(allow setting order of priority)
Single-step/handwheel function Yes
Interpolation
Positioning, linear interpolation, arc
interpolation
G00,G01,G02/G03

Adtech CNC9650 Specifications

General

Brand	Adtech
Model	CNC9650
Category	Control Systems
Language	English