ADTECH9 Series CNC Maintenance Manual
- 58 -
Insert the USB disk;
Press [File] to enter file operation interface;
Select USB disk, move cursor to select a file in the disk, and press [EOB] to load the file.
7.3
Editing & modifying programs
The program in CNC memory can be edited using NC keypad. In the main menu, press [Edit] to enter
program edit interface and edit the program in current work area (for loading program into work area, refer
to 7.2). The edit mode is similar to notepad in Windows. Move the cursor directly to locate, press keys to
enter, press [EOB] to change line, press [Delete] to delete the character where the cursor locates, and press
[Cancel] to delete the previous character.
The shortcuts in program editing interface mainly include copy, paste, delete, macro function fast programming
and so on. The specific operations are as follows:
Copy, paste and delete:
7.3.1 Single-line copy, paste and delete
Move the cursor to the line you want to copy, and then press “Line Copy [F1]” to copy the single line; then,
move the cursor to the position you want to paste, and then press “Line Paste [F2]” to paste the single line.
Move the cursor to the line you want to delete, and then press “Line Delete [F3]” to delete the single line.
7.3.2 Multi-line copy, paste and delete
Move the cursor to the starting line to be copied, and then press “Segment Copy [F4]”, the prompt box “Please
move the cursor to the end of the segment to be copied and press [Enter] for confirmation” pops up, press “OK
[EOB]” and close the prompt box. According to the prompt, move the cursor to the end of the segment of the
program you want to copy, and press the “Enter” button to complete the segment copying; then move the cursor
to the position to be pasted, and then press “Segment Paste [F5]” to complete the segment paste.
Move the cursor to the starting line to be deleted, and then press “Segment Delete [F6]”, the prompt box “Please
move the cursor to the end of the segment to be deleted and press [Enter] for confirmation” pops up, press “OK
[EOB]” and close the prompt box. According to the prompt, move the cursor to the end of the segment of the
program you want to delete, and press the “Enter” button; then press “Segment Paste [F6]” to complete the
segment deletion.
7.3.3 Macro function fast programming
When programming a macro program, just enter the keyword in the corresponding macro function (the number
of keyword letters is greater than or equal to 2),and press the "Enter" button, a list of macro functions containing
the keyword will pop up, move the up and down keys and Page Up/Down keys to select the corresponding
macro function; then, press the "OK [EOB]" key to implement the quick programming of the corresponding
To Next Page
Loading...
Need help?
General
