Adtech CNC9650 User Manual

ADTECH9 Series CNC Maintenance Manual
- 74 -
8.6.4 Tool magazine parameters
Tool magazine parameters collect the common required parameters of the tool magazine. The specific meaning
of the parameters should be determined by the tool magazine of the machine tool manufacturer, and therefore
should refer to the instructions provided by the machine tool manufacturer.
8.6.5 Spindle parameters
Spindle parameters are the set of electrical characteristics of servo and common spindles. The specific
application also depends on the spindle selection of the machine tool manufacturer. The servo parameters and
axis parameters have the same meaning, and therefore please refer to the description of axis parameters.
Spindle parameter interface is shown below:
Spindle Parameter Interface

Adtech CNC9650 Specifications

General

Brand	Adtech
Model	CNC9650
Category	Control Systems
Language	English