Adtech CNC9650 User Manual

ADTECH9 Series CNC Maintenance Manual
- 49 -
Servo alarm; if the servo doesn’t alarm, parameter P2.001~004 setting may be contrary to actual
servo alarm level. Please modify the parameters.
The corresponding function ports are IN34~37, which can be checked in input diagnosis.
1046 : Axis number definition interface repeat error
Interface axis number set by parameter P2.45~P2.49 is specified repeatedly
1047 : Spindle not reset
1048 : Mold not clamped
1049 : Safety signal can't be detected
1051 : Air pressure insufficient
1052 : System material clamping signal invalid alarm
1053 System filling machine oil pressure alarm
1054 Spindle alarm
1055 Inverter alarm
1056 Tool placement failure
1057 Tool grabbing failure
1058 Magazine door detection error
1059 Detent detection error
1060 Tool releasing detection error
1061 Excessive double driver shaft zero deviation
1062 Reserve
1063 Reserve
1064 Reserve
1065 Reserve
1066 Reserve
1067 Reserve
1068 Reserve
1069 Reserve
1070
Reserve
1071
Reserve

Adtech CNC9650 Specifications

General

Brand	Adtech
Model	CNC9650
Category	Control Systems
Language	English