1. ->In handheld box file parameter interface -> Press [ Other parameters] ->> enter
1) Cycle processing times: The number of products processed in the current file
cycle. 0 indicates unlimited time. To achieve cyclic machining, set the machining
mode to cycle
2) Default needle lift height: The default needle height for the end point and
single point command
3) Arc speed clamping factor: Arc clamp speed
4) Whether to use safe height function: Whether the Z-axis safe height function is
enabled
5) Z-axis safe height: Safe height in Z machining
6) Automatic fillet error range: The distance between the maximum cut edge and
To Next Page
Loading...
