User Manual of TV5600-B01 Series Dispensing Control System
Different actions can be made according to input conditions by defining different tags and making
different jumps in different situations.
4.File call
Note when using file call
The starting point set in the file call parameter will offset the called file to the set
starting point
As shown in the above figure, the first file call will go to file number 6 at 0,0,0, and
the second will go to file number 6 at 50,50,5...
The starting point of the file call setting is similar to the graphic translation operation.
To Next Page
Loading...
Need help?
General
