OsmoPRO MAX Automated Osmometer User Guide
11
WARNING: To reduce the risk of bodily injury, electric
shock, fire, and damage to your instrument, please read
and observe all precautions in this user guide.
Only operate this product in accordance with the
equipment design, operating instructions, and
manufacturer recommendations; to do otherwise may
impair the instrument function or create a safety hazard.
Do not attempt to perform electrical work if you are not
fully qualified. This guide is not a substitute for electrical
training.
Operator Training
This user’s guide provides information to qualified
clinical technicians and technologists who have
completed comparable vocational training.
Training and experience in the health risks of biological
substances is required:
Safety Equipment
When working with the device, take measures according
to lab regulations and wear protective clothing:
• Protective gloves
• Lab coat
Guidelines and Regulations to Follow
• All safety instructions in this user’s guide
• The environmental, installation, and connection
specifications in the user manual
• National and international regulations pertaining to
laboratory work
• Original spare parts and tools made or recommended
by Advanced Instruments
• Good Laboratory Practice (GLP)
• Accident prevention regulations published by the
accident insurance companies for laboratory work
• Power cable: Defective power cables are not to be
used to connect the instrument and the power supply
system.
• Power strip: If several instruments are connected to
one power strip, always consider the maximum power
consumption of each device.
• Power supply: Only connect instruments to voltage
sources, whose voltage equals the instrument’s
voltage.
Where is Use of the Instrument Prohibited?
Never use the instrument in a potentially explosive
atmosphere without appropriate protective equipment.
For further information, contact Advanced Instruments
Technical Support (see Contacting Advanced
Instruments).
Secure Decommissioning
Take the instrument completely out of operation at any
time by either switching o the power switch or by
disconnecting the power plug.
If you need to decommission the instrument long-term,
see Shutting Down the Instrument for Shipping or
Long-term Storage.
CAUTION: Except to remove the shipping stop when
installing the instrument, do not remove the back and
side panels. These should only by Advanced Instruments
Technical Service personnel or any company authorized
by Advanced Instruments.
Safe Use
To Next Page
Loading...
Need help?
General
