Chapter 3: User Interface
OsmoPRO MAX Automated Osmometer User Guide
40
Indicates a system alarm.
Alarms can occur during testing and will stop the entire
test process for the safety of the instrument. If an Alarm
occurs, it restricts the user from testing and calibrating
the instrument until the issue is resolved.
Press the icon to view a list of alarm(s).
Refer to Troubleshooting for warning and alarm
explanations and how to troubleshoot these issues.
System Fluid Tab
Press the System fluid tab for information on the system
fluid icon on the Home screen. This icon indicates the
umber of tests remaining in system based on system
fluid level.
• Ready - Sucient fluid is available
for the displayed number of tests.
• Low - Fewer than 100 tests remain
based on system fluid contents.
• Empty - Load new system fluid into
system (see Instrument
Maintenance).
LAN/LIS Tab
Press the LAN/LIS tab for information on the icons that
indicate the LAN connection status and LIS connection
status.
Access Levels Tab
Press the Access levels tab for information on the icons
on system menus that indicate the access levels of
instrument users.
To Next Page
Loading...
Need help?
General
